TM 9-2320-289-20
10-8.
DOOR AND VENT WINDOW MAINTENANCE (Con’t).
5.
Remove rivet (35) and sash hinge (34) from frame hinge (36), Straighten tab on tab washer
(41), remove nut (42), tab washer, spring (40), spring retainer washer (39), 2 washers (38),
and stop (37). Discard rivet.
6.
Remove sash (45) from frame (33). Remove weatherstrip (46) from frame.
c.
ASSEMBLY
NOTE
• If replacing door window, perform step 8.
• If replacing vent window, perform steps 4-7.
1.
Position weatherstrip (46) on frame (33). Position sash (45) on frame.
2.
Install stop (37), 2 washers (38), spring retainer washer (39), spring (40), tab washer (41),
and nut (42) on sash (45). Bend tab on tab washer back to lock nut into position. Install sash
hinge (34) on frame hinge (36) with new rivet (35).
3.
Apply adhesive to weatherstrip (43) as required. Install weatherstrip on frame (33) and bend
tabs on back of weatherstrip.
TA49949
10-25
