10-10. REARVIEW MIRROR REPLACEMENT

Section Il. STANDARD BODY ACCESSORIES MAINTENANCE

10-11. WINDSHIELD WIPER AND WASHER REPLACEMENT

/.25ton/TM-9-2320-289-20 CUCV Series Trucks at Unit level Manual
Page Navigation
503

TM 9-2320-289-20 10-10. REARVIEW MIRROR REPLACEMENT. This task covers: a. Removal b. Installation a . R E M O V A L 1. Remove bolt (10) and slide up cover (9) while turning outside rearview mirror (7) toward window. Remove 3 bolts (11), and remove outside rearview mirror assembly and gasket (2). 2. Remove 2 bolts (1) and separate clamp (4) from bracket (3). Remove retainer (5) and sleeve (6), and separate cover (9) from outside rearview mirror (7). Remove 2 grommets (8) and retaining nut (12) as required. b. INSTALLATION NOTE M1028A2 and M1028A3 driver’s side mirrors have a longer shaft than do other models. 1. Install retaining nut (12) on bracket (3) and 2 grommets (8) on outside rearview mirror (7) arm if removed. Position outside rearview mirror arm through hole in cover (9) with lower grommet against cover. 2. Install sleeve (6) and retainer (5) on outside rearview mirror (7) arm. Install bracket (3) and clamp (4) around sleeve with 2 bolts (1). 3. Install gasket (2) and outside rearview mirror (7) assembly with 3 bolts (11), Slide down cover (9) and install bolt (10). 10-30 Change 2

Privacy Statement
Press Release
Contact