TM 9-2320-289-20
10-8.
DOOR AND VENT WINDOW MAINTENANCE (Con’t).
NOTE
If window will not disengage using the procedure in step 5, raise window
slightly, remove bumper (15), lower window, and repeat step 5.
5.
Slide window glass (18) forward to
disengage forward window regulator
assembly roller (21) from notch in
sash channel (20). Push window
glass forward, then tilt up until rear
window regulator assembly roller is
disengaged. Place window glass and
sash channel assembly in
level
position and pull straight up and out
of door (13).
TA49947
10-23
