TM 9-2320-289-20
10-6
DOOR HANDLE, LOCK, AND CYLINDER REPLACEMENT (Con’t).
2.
Remove 2 bolts (1), handle (6), and outside door connecting link (4) from door (2). Remove
outside door connecting link from handle. Remove large gasket (3) and small gasket (5).
Discard gaskets.
3.
Remove retainer (9), lock cylinder unit (7), and gasket (8), Discard gasket.
4.
Remove clips (14 and 16) and disconnect inside handle connecting link (17) and inside door
connecting link (12). Remove lock knob (13). Remove 3 screws (15) and lock assembly (10).
5.
Remove seal (20). Remove 3 screws (19). Slide clip (21) until large slot alines with inside
handle connecting link (17). Disconnect inside handle connecting link and remove control
assembly (18).
TA49940
10-15
