10-6 DOOR HANDLE, LOCK, AND CYLINDER REPLACEMENT

10-5. DOOR AND HINGE ASSEMBLY MAINTENANCE (Cont) - TM-9-2320-289-20_507

10-6 DOOR HANDLE, LOCK, AND CYLINDER REPLACEMENT (Cont)

/.25ton/TM-9-2320-289-20 CUCV Series Trucks at Unit level Manual
Page Navigation
487

TM 9-2320-289-20 10-6 DOOR HANDLE, LOCK, AND CYLINDER REPLACEMENT. This task covers: a. Removal b. Installation INITIAL SETUP: Equipment Condition Materials/Parts • Door panel removed. (See paragraph 10-7) • Three gaskets CAUTION When removing clips (11, 14, and 16), carefully push at top of clip where it is connected to connecting links (4, 12, or 17) to pivot clip away from link. Failure to follow this • If removing handle (6) caution will result in damage to clips, NOTE and lock cylinder unit (7), perform steps 1-3. • If removing lock assembly (10) and steps 1, 4, and 5. 1. Remove clip (11) and disconnect outside door control assembly connecting link (4) (18), from perform lock assembly (10). TA49939 10-14

Privacy Statement
Press Release
Contact