TM 9-2320-289-20
10-6
DOOR HANDLE, LOCK, AND CYLINDER REPLACEMENT (Con’t).
b.
INSTALLATION
NOTE
• If installing lock assembly (10) and control assembly (18), perform
steps 1, 2, and 5.
• If installing handle (6) and lock cylinder unit (7), perform steps 3-5.
1.
Connect inside handle connecting link (17) to control assembly (18). Slide clip (21) until small
slot alines with inside handle connecting link. Install control assembly with 3 screws (19), Install
seal (20).
2.
Install lock assembly (10) in door (2) with 3 screws (15). Install lock knob (13). Connect inside
handle connecting link (12) and inside door connecting link (17) to lock assembly and install
clips (14 and 16).
TA49941
10-16
