TM 9-2320-289-20
10-5.
DOOR AND HINGE ASSEMBLY MAINTENANCE (Con’t).
e.
ADJUSTMENT
1.
Check measurements as follows:
Gap between windshield pillar (14) and door (4) should be 0.02 in. to 0.14 in.
(0.5 mm to 3.5 mm).
Gap between roof panel (13) and door (4) should be 0.1 in. to 0.28 in. (3 mm to
7 mm).
Gap between rear pillar (15) and door (4) should be 0.1 in. to 0.28 in. (3 mm to
7 mm).
Gap between rocker panel (16) and door (4) should be 0.15 in. to 0.33 in. (4 mm to
8 mm).
If these measurements require adjustment, perform ADJUSTMENT steps 2-4.
2.
Remove door lock striker (17) and
washer (18) from striker plate (19).
TA49937
10-12
