TM 9-2320-289-20
7-12.
SERVICE BRAKE PEDAL REPLACEMENT.
This task covers:
a.
Removal
b. Installation
INITIAL SETUP:
Equipment Condition
Materials/Parts
• Stoplight switch and actuator removed.
• One locknut
(See paragraph 4-16)
• One retainer
a.
REMOVAL
1.
Remove 2 screws (5) and wiring harness shield (4) from brake pedal bracket (2),
NOTE
Brake pedal is factory-installed without washer (14). Ensure that a washer
is used for installation.
2.
Remove retainer (15) and washer (14) and disconnect power booster rod (13). Remove return
spring retainer (12) and return spring (3). Discard retainer (15).
3.
Remove locknut (1), Remove brake pedal (11) assembly. Remove 2 bushings (8) and spacer
(7) from brake pedal pivot bolt (6). Remove screw (9) and brake pedal pad (10) if damaged,
Discard locknut.
TA49686
7-38
