TM 9-2320-289-20
7-12.
SERVICE BRAKE PEDAL REPLACEMENT (Con’t).
b.
INSTALLATION
1.
Install brake pedal pad (10) and screw (9) if removed. Install spacer (7) and 2 bushings (8) on
brake pedal (11). Install brake pedal assembly with pivot bolt (6) and new locknut (1).
2.
Install return spring (3) and return spring retainer (12). Install power booster rod (13) on brake
pedal (11) pin with washer (14) and new retainer (15).
3.
Install wiring harness shield (4) on
FOLLOW-ON TASKS:
• Install actuator and stoplight switch.
• Check operation of brakes.
brake pedal bracket (2) with 2 screws (5).
(See paragraph 4-16)
7-39/ (7-40 blank)
