TM 9-2320-289-20
8-2.
WHEEL AND TIRE MAINTENANCE.
This task covers:
a.
Removal
c.
Installation
b. Inspection
INITIAL SETUP:
Tools/Test Equipment
Manual References
•
Torque wrench
• TM
9-2320-289-10
• TM 9-2610-200-14
General Safety Instructions
• Position wheel chocks at front and rear of tires opposite axle to be raised.
a.
REMOVAL
WARNING
Position wheel chocks at front and rear of tires opposite axle to be raised.
Truck must be on level surface before attempting to remove wheel (3).
Failure to follow this warning may result in injury or death to personnel.
Perform step 1.1
1.
Position wheel chocks. Loosen Iugnuts
(1), but DO NOT remove. Raise truck
a n d s u p p o r t o n j a c k s t a n d ( 2 ).
Remove Iugnuts and wheel (3).
NOTE
for M1028A2 and M1028A3.
NOTE
Only rear dual wheel has spacer ring (3.1).
1.1.
Position wheel chocks. Loosen lugnuts (1), but DO NOT remove. Raise truck and support on jack
stand (2). Remove Iugnuts, clamping ring (3.2), outer rear wheel (3) or front wheel, spacer ring
(3.1), and inner rear wheel.
8-2
Change 2
