TM 9-2320-289-20
6-13.
REAR STABILIZER BAR, BUSHINGS, AND REINFORCEMENT BRACKET
REPLACEMENT.
This task covers:
a. Removal
b. Installation
INITIAL SETUP:
Materials/Parts
Tools/Test Equipment
• Nine locknuts
• Torque wrench
a.
REMOVAL
1.
Remove 4 locknuts (4), washers (5), 2
clamps (7), and 4 bolts (8). Discard
locknuts.
2.
Remove 2 bushings (6) from stabilizer
bar (9). Inspect bushings for wear and
discard if damaged.
3.
Remove 2 locknuts (3), 8 washers (2),
8 grommets (1), 2 spacers (11), 2
bolts (10), and rear stabilizer bar (9).
Discard locknuts.
Change 1
6-23
