TM 9-2320-289-20
6-12.
FRONT STABILIZER BAR AND BUSHINGS REPLACEMENT (Con’t).
b.
lNSTALLATlON
1.
Position stabilizer bar (3) and install on lower spring anchor plates (4) with
bolts (1). Tighten bolts to 230 Ib.-ft. (312 N•m).
NOTE
Ensure that bushings (10) are installed with slit facing backward
alined under frame bracket. Install new bushings if removed.
4 washers (2) and 2
and are
2.
Install 2 bushings (10) on stabilizer bar (3). Position 2 clamps (9) over bushings and install with
4 bolts (6), 8 washers (7), and 4 new locknuts (8). Tighten locknuts to 55 Ib.-ft. (75 N•m).
TA49655
6-22
