TM 9-2320-289-20
7-3.
PARKING BRAKE PEDAL REPLACEMENT.
This task covers:
a. Removal
b. Installation
INITIAL SETUP:
Equipment Condition
Materials/Parts
• Wheels chocked.
• Bolt and Iockwasher
• Parking brake cable loosened.
• TWO nuts and washers
(See paragraph 7-2)
• Parking brake switch removed.
(See paragraph 4-17)
• Parking brake pedal in released position.
a. REMOVAL
1.
2.
3.
Disconnect release handle rod (10)
from parking brake retainer (9).
Remove parking brake retainer if
damaged.
Remove release handle
(13) and release handle rod, Remove
pedal cover (14) and grommet (12) if
damaged.
NOTE
Parking brake assembly (1) is
factory-installed
with
washer-
assembled bolt. DO NOT use
washer-assembied
boit
for
installation.
Remove bolt (11) and lockwasher
(7). Discard lockwasher.
NOTE
Parking brake assembly (1) is
factory-installed with flanged nuts.
DO NOT use flanged nuts for
installation.
Remove 2 nuts (6) and washers (5)
from engine compartment wall.
TA49657
7-3
