TM 9-2320-289-20
6-11.
REAR SHOCK ABSORBER AND AXLE BUMPER REPLACEMENT (Con’t).
b. INSTALLATION
NOTE
• If installing spring
perform step 1.
• If installing s h o ck
perform step 2.
bumper (10),
absorber (3),
1.
Install spring bumper (10) with new
Iockwasher (9) and nut (8).
2.
Position shock absorber (3) and
install bolt (13), new Iockwasher
(12), and nut (11). Install washer (5),
new Iockwasher (6), and nut (7) on
stud (4) or install new Iockwasher (1)
and nut (2). Tighten nuts to 65 Ib.-ft.
(88 N•m).
TA49653
6-20
