TM 9-2320-289-20
6-12.
FRONT STABILIZER BAR AND BUSHINGS REPLACEMENT.
This task covers:
a. Removal
b. Installation
INITIAL SETUP:
MateriaislParts
ToolslTest Equipment
• Four locknuts
• Torque wrench
a.
REMOVAL
1.
Remove 4 locknuts (8), 8 washers (7), 2 clamps (9), and 4 bolts (8). Discard locknuts.
2.
Remove 2 bushings (10) from stabilizer bar (3). Inspect bushings for wear and discard if
damaged.
3.
Remove 2 bolts (1) and 4 washers (2). Remove stabilizer bar (3). Inspect bushings (5) for
damage. If damaged, notify your supervisor.
TA49654
6-21
