6-10. FRONT SHOCK ABSORBER, AXLE BUMPER, AND SPRING BUMPER REPLACEMENT

Section Ill. SUSPENSION MAINTENANCE

6-11. REAR SHOCK ABSORBER AND AXLE BUMPER REPLACEMENT.

/.25ton/TM-9-2320-289-20 CUCV Series Trucks at Unit level Manual
Page Navigation
364

TM 9-2320-289-20 6-10. FRONT SHOCK ABSORBER, AXLE BUMPER, AND SPRING BUMPER REPLACEMENT. This task covers: a. Removal b. Installation INITIAL SETUP: Materials/Parts Tools/Test Equipment • Nine Iockwashers • Torque wrench a. REMOVAL 1. 2. NOTE If removing shock absorber (5), perform step 1. If removing r i g h t or left bumpers, perform step 2. Remove 2 nuts (1), Iockwashers (2), and bolts (4), and remove shock absorber (5). Discard Iockwashers. Remove nut (7 or 10), Iockwasher (6 or 11), and axle bumper (14 or 12). Remove 2 nuts (8), Iockwashers (9), and spring bumpers (13) as required. Discard Iockwashers. b. INSTALLATION NOTE If installing r i g h t or left bumpers, perform step 1. 1. 2. If installing shock absorber (5), perform step 2. Install 2 spring bumpers (13) with 2 new Iockwashers (9) and nuts (8). Install axle bumper (14 or 12) with new Iockwasher (6 or 11) and nut (7 or 10) if removed. Install shock absorber (5) on frame bracket (3) and front axle bracket with 2 bolts (4), new Iockwashers (2), and nuts (1). Tighten nuts to 65 Ib.-ft. (88 N•m). TA49651 6-18

Privacy Statement
Press Release
Contact