TM 9-2320-289-20
6-8.3. SERVICE REAR DIFFERENTIAL (M1009, M1028A2, AND M1028A3).
This task covers:
a. Service
INITIAL SETUP:
Materials/Parts
Tools/Test Equipment
• Sealant (Item 41, Appendix C)
• Torque wrench
1.
2.
3.
4.
5.
6.
7.
Place a suitable container under
differential housing.
Remove 10 bolts (1) and differential
cover (3) and allow all lubricating oil to
drain.
Remove
old
R T V s e a l a n t f r om
differential housing (2).
NOTE
Ensure that differential cover and magnet are clean.
Apply bead of RTV sealant to differential housing (2).
Install differential cover (3) with 10 bolts (1).
Tighten 10 bolts (1) to 35 Ib.-ft. (47 N•m).
Fill differential with lubricating oil. (See LO 9-2320-289-12)
TA701838
6-16.2
Change 2
