5-4. TRANSFER CASE BEZEL AND BOOT REPLACEMENT (ALL EXCEPT M1028A1 AND M1031)

5-3. TRANSFER CASE PLATE AND BOOT REPLACEMENT (M1028A1 AND M1031)

5-5. TRANSFER CASE LINKAGE AND CONTROL LEVER REPLACEMENT (M1028A1 AND M1031)

/.25ton/TM-9-2320-289-20 CUCV Series Trucks at Unit level Manual
Page Navigation
338

TM 9-2320-289-20 5-4. TRANSFER CASE BEZEL AND BOOT REPLACEMENT (ALL EXCEPT M1028A1 AND M1031). This task covers: a. Removal b. Installation a. REMOVAL 1. Remove knob (1). 2. Pry off and remove (2) . 3. Slide boot assembly lever assembly (8). 4. Remove 4 screws (5) and bezel assembly (7). NOTE When installing bezel assembly (7), lever assembly (8) must pass through bezel’s central slot (4). 1. Install bezel assembly (7) onto housing (6) with 4 screws (5). 2. Install boot assembly (3) over control lever assembly (8). 3. Snap retaining plate (2) over boot assembly (3) and bezel assembly (7) . 4. Install knob (1). TA49637 5-7

Privacy Statement
Press Release
Contact