TM 9-2320-289-20
5-2.1.
TRANSMISSION VACUUM LINES REPLACEMENT (Con’t).
5.
Remove 3 bolts (11) and fuel filter
assembly (12) mounting bracket from
bulkhead.
6.
Remove drain pipe (13) from fuel filter
assembly (12).
7.
Place fuel filter assembly (12) on
engine free of vacuum pipe (5).
8.
Disconnect vacuum pipe (5) from 2
hoses (6 and 8) and remove vacuum
pipe. Remove 2 clips (2) from vacuum
pipe.
b.
INSTALLATION
1.
From engine compartment, install
vacuum pipe (5).
2.
Install 2 hoses (6 and 8) to vacuum
pipe (5).
3.
Install 2 clips (2) to vacuum pipe (5). Install 2 clips to valve cover studs (3) with 2 nuts (1).
4.
Install CDRV assembly (4) mounting bracket to valve cover and intake manifold with 3 nuts.
5.
Install drain pipe (13) to fuel filter assembly (12).
6.
Install fuel filter assembly (12) to bulkhead with 3 bolts (11).
7.
Install clip (10) to fill tube assembly (9) and vacuum pipe (5).
8.
Connect hose (8) to vacuum modulator assembly (7).
FOLLOW-ON TASKS:
Install air cleaner if removed. (See paragraph 3-9)
Connect both battery negative cables. (See paragraph 4-38)
Check hydraulic fluid level. (See LO 9-2320-289-12)
Change 2
TA701835
5-5.1
