TM 9-2320-289-20
5-6.
TRANSFER CASE LINKAGE AND CONTROL LEVER ASSEMBLY
MAINTENANCE (ALL EXCEPT M1028A1 AND M1031) (Con’t).
b.
INSTALLATION
WARNING
Always wear goggles when working on underside of truck. Failure to follow
this warning may result in serious eye injury.
NOTE
• If installing control lever assembly, perform steps 1-4 and 8.
• If installing transfer case linkage, perform steps 5-8.
1.
Install control lever (2) and spring (6) to fork (7) with pin (8), washer (1), and new cotter pin
(18).
TA49640
5-12
