b. INSTALLATION - TM-9-2320-289-20

3-24. ACCELERATOR PEDAL AND LEVER ASSEMBLY REPLACEMENT.

3-25. ENGINE IDLE SPEED ADJUSTMENT

/.25ton/TM-9-2320-289-20 CUCV Series Trucks at Unit level Manual
Page Navigation
183

TM 9-2320-289-20 3-24. ACCELERATOR PEDAL AND LEVER ASSEMBLY REPLACEMENT (Con’t). b. INSTALLATION 1. 2. 3. 4. 5. 6. NOTE If installing accelerator pedal (1), perform steps 4 and 5. Install support (4) and lever assembly (2) into grooves of support. Install plate (6) with 3 screws (7). Install electrical plug on left side of plate (6). Install spring (3) to accelerator pedal (1). Install spring and accelerator pedal to lever assembly (2). NOTE Retainer (8) must be tight against pedal (1) rib. Install new retainer (8) to secure accelerator pedal (1) to lever assembly (2). Install accelerator cable assembly (5) to lever assembly (2). FOLLOW-ON TASKS: Connect both battery negative cables. (See paragraph 4-38) TA49817 3-70

Privacy Statement
Press Release
Contact