FOLLOW-ON TASKS - TM-9-2320-289-20

3-23. ACCELERATOR CABLE AND FAST IDLE SOLENOID ASSEMBLY REPLACEMENT (Cont)

3-24. ACCELERATOR PEDAL AND LEVER ASSEMBLY REPLACEMENT.

/.25ton/TM-9-2320-289-20 CUCV Series Trucks at Unit level Manual
Page Navigation
181

TM 9-2320-289-20 3-23. ACCELERATOR CABLE AND FAST IDLE SOLENOID ASSEMBLY REPLACEMENT (Con’t). 6. Carefully push accelerator cable assembly (1) through bulkhead into driver’s compartment. 7. In driver’s compartment, install accelerator cable assembly (1) into forked end of accelerator pedal lever assembly (4). Install retainer (3) to end of accelerator cable assembly until it is seated. FOLLOW-ON TASKS: Connect both battery negative cables. (See paragraph 4-38) If fast idle solenoid was replaced, adjust as required. (See paragraph 3-25) TA49815 3-68

Privacy Statement
Press Release
Contact