TM 9-2320-280-34
This task covers:
a. Removal
b. Installation
INITIAL SETUP:
Tools
General Safety Instructions
General mechanic's tool kit:
Do not touch hot exhaust system with bare
automotive (Appendix G, Item 1)
hands.
Materials/Parts
Maintenance Level
Cotter pin (Appendix E, Item 168)
Direct support
Four blind rivets (Appendix E, Item 193)
Manual References
TM 9-2320-280-24P
WARNING
Do not touch hot exhaust system components with bare hands.
Severe injury will result.
a. Removal
1.
Remove cotter pin (2) and exhaust pipe (3) from exhaust diverter box (1). Discard cotter pin (2).
NOTE
For instructions on the replacement of rivets, refer to para. 22-7.
2.
Remove four rivets (4) and exhaust pipe (3) from cowl (5). Discard rivets (4).
b. Installation
1.
Install exhaust pipe (3) on exhaust diverter box (1) with cotter pin (2).
2.
Install exhaust pipe (3) on cowl (5) with four rivets (4).
1
5
2
3
4
16-5
