TM 9-2320-280-34
This task covers:
a. Removal
b. Installation
INITIAL SETUP:
Applicable Models
Personnel Required
M966, M966A1, M996, M996A1, M997,
One mechanic
M997A1, M997A2, M998, M998A1, M1025,
One assistant
M1025A1, M1025A2, M1037, M1038,
Manual References
M1038A1
TM 9-2320-280-20
Tools
TM 9-2320-280-24P
General mechanic's tool kit:
Equipment Conditions
automotive (Appendix G, Item 1)
Plenum assembly removed
Materials/Parts
(TM 9-2320-280-20).
Eight blind rivets (Appendix E, Item 192)
Exhaust diverter assembly removed
Four locknuts (Appendix E, Item 56)
Maintenance Level
Direct support
NOTE
For instructions on removal and installation of rivets, refer to
a. Removal
1.
Remove eight rivets (8) and cowl cover (7) from cowl (5).
2.
Remove four locknuts (1), washers (2), capscrews (6), washers (2), insulator (4), and cowl cover
exhaust pipe flange (3) from cowl (5). Discard four locknuts (1).
3.
Inspect insulator (4), replace if defective.
b. Installation
1.
Install insulator (4) and cowl cover exhaust pipe flange (3) to cowl (5) with four washers (2),
capscrews (6), washers (2), and locknuts (1). Tighten locknuts (1) to 6 lb-ft (8 Nm).
2.
Install cowl cover (7) on cowl (5) with eight rivets (8).
Change 2
