TM 9-2320-280-34
15-3. 6,000 LB. ELECTRIC WINCH REPAIR (Cont'd)
b. Cleaning
CAUTION
Do not clean brake assembly or damage to equipment may result.
Clean all winch components except brake assembly (7) in accordance with para. 2-13.
c. Inspection
NOTE
For general inspection instructions, refer to para. 2-14.
1.
Inspect drum (4) for damage to splined end (14), flanges (15), and tube (16). Replace winch if damaged.
2.
Inspect drum supports (2) for damage. Replace winch if damaged.
3.
Remove bushing (12) from drum support (2).
4.
Inspect oil seal (13) for damage. Perform steps 5 through 7 if seal (13) is damaged, if not, go to step 8.
5.
Remove seal (13) from drum support (2).
6.
Inspect sealing surface (17) of drum support (2) for damage. Replace winch if damaged.
7.
Install seal (13) into drum support (2).
8.
Inspect bushing (12) for damage. Replace if damaged. Install bushing (12) in drum support (2).
9.
Repeat steps 3 through 8 for other drum support.
Change 2
15-7
