TM 9-2320-280-34
15-3. 6,000 LB. ELECTRIC WINCH REPAIR (Cont'd)
NOTE
In order to perform steps 3 through 11, it may be necessary to
remove plastic coating from winch.
3.
Remove nut (11) and lead 6C (2) from control (6).
4.
Remove capscrew (10), lead 7C (3), and ground wire (4.1) from motor (14).
5.
Disconnect motor connector (13) from control connector (12).
6.
Remove three nuts (15) and control leads (16), (17), and (18) from motor (14).
7.
Remove vent tube fitting (19) from motor (14).
10
6
3
4.1
11
2
14
13
12
Change 2
15-3
