TM 9-2320-280-34
15-3. 6,000 LB. ELECTRIC WINCH REPAIR (Cont'd)
12.
Mark drum support (3), ring gear (9), and end housing (10) for assembly.
13.
Remove ten socket head screws (8), end housing (10), ring gear (9), and gasket (4) from drum
support (3). Discard gasket (4).
14.
Remove ring gear (9) and gasket (4) from end housing (10). Discard gasket (4).
15.
Remove stage three gear carrier (16) and thrust washer bearing (15) from end housing (10). Discard
thrust washer bearing (15).
16.
Remove set screw (17), spring (18), and ball (19) from end housing (10).
17.
Remove clutch lever (20) and O-ring (21) from end housing (10). Discard O-ring (21).
18.
Remove stage two gear carrier (14), stage one gear carrier (13), stage one sun gear (12), and clutch
ring gear (11) from end housing (10).
NEW CONFIGURATION
Change 2
15-5
