TM 9-2320-280-34
7-7. TRANSMISSION/TRANSFER CASE ASSEMBLY INSTALLATION (3L80) (Cont'd)
NOTE
Be certain torque converter rotates freely
3.
Apply sealing compound to capscrews (5) and studs (2).
4.
Move transmission (3) forward onto engine dowels (6). Install four capscrews (5) and two studs (2)
on transmission (3) and engine (1). Tighten capscrews (5) and studs (2) to 35 lb-ft (48 Nm).
5.
Install speedometer cable (12) in bracket (13) and install 90 degree adapter (11) to transfer case (4).
6.
Raise transmission (3) and transfer case (4) and remove stand supporting engine (1). Install
transmission mount crossmember (TM 9-2320-280-20).
7.
Remove safety chain and lower transmission jack.
NOTE
It will be necessary to rotate flywheel clockwise from capscrew in
front of crankshaft to gain access to capscrews securing torque
converter.
8.
Align torque converter (8) with holes in flywheel (10). Install six capscrews (9) and torque
converter (8) on flywheel (10).
9.
Tighten capscrews (9) to 32 lb-ft (43 Nm).
Change 2
7-13
