TM 9-2320-280-34
7-7. TRANSMISSION/TRANSFER CASE ASSEMBLY INSTALLATION (3L80) (Cont'd)
13.
Install packing retainer (23) on modulator (20). Install modulator (20) into transmission (6) with
clip (22) and capscrew (21). Tighten capscrew (21) to 18 lb-ft (24 Nm).
14.
Connect hoses (17) to transmission/transfer case cooler lines (19) with two hose clamps (18).
15.
Connect main vent line (16) to transmission/transfer case vent line (15).
16.
Lower rear of vehicle.
20
18
19
21
17
22
16
15
6
23
FOLLOW-ON TASKS:
Install front propeller shaft (TM 9-2320-280-20).
Install muffler support bracket (TM 9-2320-280-20).
Install converter housing cover (TM 9-2320-280-20).
Install transmission oil dipstick (TM 9-2320-280-20).
Install rear propeller shaft (TM 9-2320-280-20).
Install transmission shift rod (TM 9-2320-280-20).
Install engine access cover (TM 9-2320-280-20).
Fill transmission to proper fluid level (TM 9-2320-280-10).
Start engine (TM 9-2320-280-10) and inspect for leaks.
Lower and secure hood (TM 9-2320-280-10).
Road test vehicle (TM 9-2320-280-20) and check for proper transmission/transfer
case operation.
Change 2
7-15
