TM 9-2320-280-34
6-4. 200 AMPERE ALTERNATOR (A0013036AA) TESTING AND REPAIR (Cont' )
d
25.
Install spacer (18) and two positive leads (19) on fuse holder (3) with nut (17).
26.
Connect positive lead (19) and lead 4 (14) to inner positive rectifier bridge hole (12) with capscrew (15).
Tighten capscrews (15) to 8-10 lb-ft (11-14 N m).
27.
Connect positive lead (19) and lead 7 (5) to outer bridge hole (11) with capscrew (16).
28.
Route three leads (6), lead 6 (4), and lead 7 (5) through grommet (8) in panel (7).
29.
Install panel (7) on drive end housing (13) with four lockwashers (10) and screws (9).
30.
Align scribe marks (2) on drive end housing (13) and cover plate (1) and install cover plate (1) on
housing (13) with six screws (21) and eight screws (20).
6-36
