TM 9-2320-280-34
6-4. 200 AMPERE ALTERNATOR (A0013036AA) TESTING AND REPAIR (Cont'd)
26.
Remove two brush leads (16) from diode trio panel (17) and remove four spacers (15), brush
cover (18), two brushes (20), and two electrical brushes (19) from brush holder (21). Remove
preformed packing (22), plate (23), and gasket (24) from brush holder (21).
Discard preformed packing (22) and gasket (24).
27.
Remove two electrical brushes (19) from two brushes (20). Discard electrical brushes (19).
WARNING
Always support alternator rotor during removal. Failure to do so
may cause personnel injury or equipment damage.
28.
Remove rotor (29) and spacer (30) from drive end housing (8).
29.
Remove gasket (28) from drive end housing (8). Discard gasket (28).
30.
Remove seal (31), bearing (32), and seal (33) from drive end housing (8). Discard seals (31) and (33).
31.
Remove nut (25), lockwasher (26), and ground stud (27) from drive end housing (8). Discard
lockwasher (26).
17
16
18
15
19
20
21
29
22
23
25 26
28
27
24
33
32
31
30
8
Change 2
6-31
