TM 9-2320-280-34
6-5. 200 AMPERE ALTERNATOR (12338796-1) TESTING AND REPAIR (Cont'd)
12.
Remove shaft retaining ring (12) from core and shaft assembly (11).
WARNING
Always support alternator core and shaft assembly during
removal. Failure to do so may cause injury to personnel or
equipment damage.
13.
Use press to remove core and shaft assembly (11) from front bearing (14) and front housing (17).
14.
Remove front (23) and rear (13) retaining rings from front housing (17).
15.
Use press to remove front bearing (14) from front housing (17).
16.
Remove six nuts (16) from front rotor (15) and core and shaft assembly (11).
17.
Use three 10-32 X 2-in. long machine screws as jacks in threaded holes on end plate of front
rotor (15). Gradually tighten screws to remove front rotor (15) from core and shaft assembly (11).
Remove front rotor (15) and screws.
18.
Use press to remove rear bearing (10) from core and shaft assembly (11).
Change 2
6-41
