TM 9-2320-280-34
6-4. 200 AMPERE ALTERNATOR (A0013036AA) TESTING AND REPAIR (Cont' )
d
21.
Install diode trio assembly (23) into drive end housing (29) and tighten screws (11).
22.
Connect three positive rectifier leads (30) and diode leads (31) to stator studs (2) with nuts (32).
Tighten nuts (32) to 12-14 lb-ft (16-19 N m).
23.
Connect lead 6 (34) and lead 1 (35) to drive end housing (29) with capscrew (33). Tighten cap-scr w
e
(33) to 8-10 lb-ft (11-14 N m).
24.
Install fuse holder (37) on drive end housing (29) with two screws (36).
6-35
