TM 9-2320-280-34
3-25. ENGINE INSTALLATION (6.5 L) (Cont'd)
18.
Install leads 74A (3) and 74B (5) on solenoid (2) with clip (6) and screw (7).
19.
Install lead 81B (8) and lead 6 (22) on starter terminal (23) with lockwasher (10) and nut (9).
Using torque adapter, tighten nut (9) to 25 lb-ft (34 N.m).
20.
Install negative cable 7A (16), lead 3D (13), and lead 7 (25) on starter terminal (24) with lock-
washer (12) and nut (11). Using torque adapter, tighten nut (11) to 15 lb-ft (20 N.m).
21.
Install clamp (14) and negative cable 7A (16) on starter (1) with screw (15).
NOTE
Steps 22 through 25 apply to vehicles equipped with a winch.
22.
Install clamp (21) and leads 6 (22) and 7 (25) on oil pan bracket (19) with capscrew (20) and
assembled locknut (18).
23.
Install lead 6 (22) on starter terminal (23) with lockwasher (10) and nut (9).
24.
Install lead 7 (25) on starter terminal (24) with lockwasher (12) and nut (11).
Using torque adapter, tighten nut (11) to 15-lb-ft (20 N.m) and nut (9) to 25 lb-ft (34 N.m).
25.
26.
Deleted
Change 2
