TM 9-2320-280-34
3-25. ENGINE INSTALLATION (6.5 L) (Cont'd)
1.
Lower engine (1) into vehicle.
WARNING
Transmission must be supported during engine installation.
Failure to do this may cause injury to personnel or damage to
equipment.
2.
Raise and support transmission (3).
3.
Install transmission (3) on engine (1) with four capscrews (4) and two studs (2). Using torque
sequence tighten capscrews (4) and studs (2) to 35 lb-ft (48 N.m)
4.
Align right engine mount insulator (5) on engine mount bracket (6) and install two washers (8) and
locknuts (7). Repeat for left engine mount. Using torque adapter, tighten locknuts (7)
to 90 lb-ft (122 N.m).
Change 2
3-147
