TM 9-2320-280-34
3-25. ENGINE INSTALLATION (6.5 L) (Cont'd)
NOTE
It will be necessary to rotate flywheel clockwise from capscrew
in front of crankshaft to gain access to install capscrews to
torque converter.
Have assistant hold crankshaft pulley in place when installing
flywheel to torque converter.
14.
Align torque converter (17) to flywheel (15) with six capscrews (16).
Tighten capscrews (16) to 32 lb-ft (43 N.m).
15.
NOTE
Gaskets may require bending over edge of converter housings
cover to make gaskets seal properly.
16.
Apply silicone compound to upper converter housing cover gasket (21). Install gasket (21) and
upper converter housing (20) on transmission (18) with four capscrews (19).
17.
Apply silicone compound to lower converter housing cover gasket (24). Install gasket (24) and lower
converter housing (23) on transmission (18) with two capscrews (22).
15
17
16
18
24
23
18
21
20
22
19
LOWER
UPPER
Change 2
3-149
