TM 9-2320-266-34
Figure 14-12. Removing Rectifier End Shield Bearing.
d. Installing the Pulley and Bearing. Instructions for
installing the alternator pulley and bearing are included in
Figure 14-10. Disengaging Bearing Retainer from End Shield.
14-5. Assembling the Alternator.
a. Position the grease retainer on the rotor shaft and
press the retainer on the shaft (figure 14-13). The plastic
retainer is properly positioned when the inner bore of the
installer tool bottoms on the rotor shaft.
Figure 14-11. Removing Bearing from Rotor Shaft.
Figure 14-13. Installing Grease Retainer.
14-4
