TM 9-2320-289-34
F-1.
GAS-PARTICULATE FILTER UNIT (GPFU) INSTALLATION (M1010) (Con’t).
21.
Install four 2 in. (51 mm) lengths of
vinyl hose to ends of 4 copper elbows
(20) with 4 hose clamps.
22.
Connect 2 copper elbows (20) with
6.5 in. (165 mm) vinyl hose (22) and
2 hose clamps. Connect 2 copper
elbows with 11 in. (279 mm) hose
(21) and 2 hose clamps.
23.
Slide 2 hose clamps over both ends
of 6.5 in. (165 mm) hose (22) and
copper elbow (20) assembly, and
install between upper canister (10)
and rear opening on gas-particulate
filter unit (6). Tighten 2 hose clamps.
24.
Slide 2 hose clamps over both ends
of 11 in. (279 mm) hose (21) and
copper elbow (20) assembly, and
install between lower canister (10)
and front opening on gas-particulate
filter unit (6). Tighten 2 hose clamps.
TA50187
F-7
