TM 9-2320-289-34
F-1.
GAS-PARTICULATE FILTER UNIT (GPFU) INSTALLATION (M1010) (Con’t).
NOTE
Ensure that valve assemblies from
each quick disconnect (24) have
been removed and discarded.
27.
Install 2 quick disconnects (24) to
ends of two 4 ft. (1.2 m) hoses from
patient heater (12) with 2 hose
clamps.
28.
Install 2 orifice assemblies (25)
through holes in 2 support brackets
(23) and secure with 2 snaprings,
Connect 2 quick disconnects (24) of
two 4 ft. (1.2 m) flex hoses to 2
orifice assemblies at 2 support
brackets.
29.
Install 2 brass adapters (1) to fourth
tee. Install fourth tee assembly with
tee clamp, screws, and Iockwashers
to upper right
front side wall,
approximately 6 in. (152 mm) from
front wall.
TA50189
F-9
