10-17. REAR BENCH SEAT REPAIR (M1009) (Cont)

10-17. REAR BENCH SEAT REPAIR (M1009) (Cont) - TM-9-2320-289-34_850

/.25ton/TM-9-2320-289-34 CUCV Series Trucks at intermediate direct support and general support level Manual
Page Navigation
834

TM 9-2320-289-34 10-17. REAR BENCH SEAT REPAIR (M1009) (Con’t). 7. Mark one end of actuating rod (21) to ensure proper assembly and remove 2 ring clips (20) and actuating rod. 1 0 . 11. 8. Remove 4 bolts (26), 2 seatbelt mounting bolts (24), latch and guide assembly (25), and latch cover (23). Note location of 2 seatbelt assemblies to ensure proper assembly and remove from bench seat assembly (2). 9. Remove 2 hinge pins (13), 4 bushings (11), and 2 hinges seat assembly (2). NOTE Quantity of hog rings secure trim (18) to frame assembly (19) different trucks. (12)’ from bench (22) used to bench seat will vary for Remove hog rings (22) securing trim (18) to bench seat frame assembly (19), and remove trim and pad (1) from bench seat frame assembly. Discard hog rings. Inspect trim (18), bench seat frame assembly (19) and pad (1) for damage. Replace if damaged. TA50434 10-63

Privacy Statement
Press Release
Contact