10-17. REAR BENCH SEAT REPAIR (M1009)

10-17. REAR BENCH SEAT REPAIR (M1009) (Cont) - TM-9-2320-289-34_850

/.25ton/TM-9-2320-289-34 CUCV Series Trucks at intermediate direct support and general support level Manual
Page Navigation
832

TM 9-2320-289-34 10-17. REAR BENCH SEAT REPAIR (M1009). This task covers: a. Disassembly b. Assembly INITIAL SETUP Equipment Condition Materials/Parts l Rear bench seat removed. l Hog rings (as required) (See TM 9-2320-289-20) Tools/Test Equipment l Screwdriver bit set, J-29843 l Hog ring pliers a . DISASSEMBLY NOTE l if disassembling seatback assembly (3), perform steps 1-4. l If disassembling bench seat assembly (2), perform steps 1, 2, and 5 through 11. 1 . Remove 2 bolts (8) from seatback assembly (3), 2 torx head bolts (9) assembly (2), and remove seatback hinge (10). Remove knob (7) from damaged. Repeat this step for hinge on other side. from bench seat seatback hinge if TA50432 10-61

Privacy Statement
Press Release
Contact