TM 9-2320-289-34
10-17. REAR BENCH SEAT REPAIR (M1009) (Con’t).
NOTE
Ensure that square corners of
seatback frame assembly (6) are
pointed to bottom of seat.
2 .
Install 2 hinges (12) to bench seat
assembly (2) with 4 bushings (11)
and 2 hinge pins (13).
3 .
Install latch cover (23) and latch and
guide assembly (25) with 4 bolts
(26),
and
install
2
seatbelt
assemblies in their original position
with 2 bolts (24). Tighten 2 bolts (24)
to 40 Ib.-ft. (54 N.m).
4 .
Install actuating rod (21 ), as marked,
with 2 ring clips (20).
5 .
Install front hinge torque rod (14), as
marked, with bolt (1 5).
6 .
Install 16 screws (17) and bench seat
trim
panel
(16)
to
bench
seat
assembly (2).
7 .
Install pad (5) to seatback frame
assembly (6). Install trim (4) and
close zipper. Tuck under zipper ends.
8 .
Position seatback assembly (3) on
bench seat assembly (2) and install
hinge (1 O) with 2 bolts (8) and torx
head bolts (9). Install knob (7) on
hinge if removed.
FOLLOW-ON TASKS:
l Install rear bench seat. (See TM 9-2320-289-20)
TA50436
10-65/(10-66 blank)
