10-16. DRIVERS AND PASSENGERS SEAT REPAIR (M1009 AND M1010) (Cont)

/.25ton/TM-9-2320-289-34 CUCV Series Trucks at intermediate direct support and general support level Manual
Page Navigation
830

TM 9-2320-289-34 10-16. DRIVER’S AND PASSENGER’S SEAT REPAIR (M1009 AND M1010) (Con’t). 2 . Make 2 holes in seat cushion trim (15) where seatback lock assembly (11) bolts (8) will be instaIled. 3 . Install M1010 seatback trim (6) to seatback frame (4) and pad (3). Secure seatback trim to seat frame (13) with new hog rings (5). 4 . Install seatback trim (6) to seatback frame (4) and pad (3). Slide in 2 lasting wires (1) through hemmed channels in seatback trim, engaging straight ends of wires under seatback frame. Secure looped ends of wires to seatback frame with 2 new hog rings (5), 5. Use new hog rings (5) as required to secure loose ends of M1009 seatback trim (6) to seatback frame (4), Close zipper and tuck under zipper ends. Make 2 holes in trim where seatback lock assembly (11) bolts (8) will be installed. 6. Place seatback assembly (2) on seat cushion assembly (18). Install pivot bolt (17), washer (16), and bushing (12). TA50430 10-59

Privacy Statement
Press Release
Contact