TM 0-2320-289-34
10-15. UTILITY TRUCK TOP ASSEMBLY REPLACEMENT (M1009) (Con’t).
8 .
If damaged, or if replacing top assembly (14), remove radio antenna grommet (1 6).
9 .
Inspect 2 side weatherstrips (7),
damage. Replace any damaged
b .
INSTALLATION
front weatherstrips (8 and 11), and rear weatherstrip (15) for
weatherstrips.
1.
2 .
3 .
4 .
5 .
6.
7 .
8 .
If removed, install radio antenna grommet (16) to top assembly (14),
Install 2 new guide pins (17) with new Iockwashers (18) and nuts (19) if removed.
CAUTION
Top assembly (14) must be carefully installed to prevent sides from
flexing. Failure to follow this caution may result in damage to top
assembly.
Have assistant on opposite side of top assembly (14) and together, lift top assembly onto truck
using 2 guide pins (17) as locators.
Install 2 bolts (9) to top assembly
(14) and cab,
On right side, position radio mounting
bracket assembly (5), and install 3
bolts (4) and washers (6).
NOTE
When installing 7 bolts (13), start
with bolts nearest endgate and
work towards cab.
Install 7 bolts (13) to sides of top
assembly (14).
Loosen 2 bolts (9) and install 2 front
bolts (12) to top assembly (14).
Install 4 bolts (1 O) and tighten 2 bolts
(9). Install 2 bolts (20).
T A 6 0 4 27
10-54
