TM 9-2320-289-34
10-5.
FENDER REPLACEMENT (Con’t).
2 .
3 .
4 .
5 .
6 .
7 .
8 .
9 .
If removed, install 7 nuts (11) to fender (4) flange.
NOTE
l An assistant is required to perform steps 3-5.
• Shims (5) should be used as required to aline fender (4).
Position fender (4) and loosely install fender to door hinge pillar (7) with bolt (8) and shim(s)
(5), Loosely install fender to cowl (1) with bolt (6) and shim(s). Loosely install bolt (9) and
shim(s) at lower end of fender.
Loosely install 5 bolts (19) securing radiator support assembly (18) to fender (4). Loosely
install 2 bolts (1 7) securing front end panel (16) to fender. Loosely install 7 bolts (15) securing
fender wheel opening flange to wheel house panel (14).
Aline fender (4) with door, hood, and windshield, adding or removing shims (5) as required,
Tighten 3 bolts (6, 8, and 9) to 30 Ib.-ft. (41 N.m). Tighten all other bolts (15, 17, and 19).
Install shield (13) with 2 retainers and 2 screws (12).
Connect wiring to fender (4) and install 2 hood bumpers (10)
Apply paint to fender (4) as required. (See TB 43-0209)
10-18
