TM 9-2320-289-34
10-5.
FENDER REPLACEMENT (Con’t).
1 .
Disconnect wiring from fender (4) and remove 2 hood bumpers (10).
2 .
Remove 2 bolts (17) securing front end panel (16) to fender (4). Remove 7 bolts (15) securing
fender wheel opening flange to wheel house panel (14). Remove 5 bolts (19) securing radiator
support assembly (18) to fender.
3 .
Remove 2 screws (12) and 2 retainers, and remove shield (13).
4.
Remove
securing
NOTE
Ensure that location of shims (5) is noted for installation.
bolt (9) and shim (s) (5) at lower end of fender (4). Remove bolt (6) and shim(s)
fender to cowl (1).
NOTE
An assistant is required to perform step 5.
5 .
Open door and remove bolt (8) and shim (s) (5) at door hinge pillar (7). Raise rear of fender
(4) and remove,
6.
If damaged or if replacing fender (4), remove 7 nuts (11) from fender flange.
7 .
If damaged, remove 4 screws (3) and seal (2) from cowl (1).
b .
INSTALLATION
WARNING
Use caution when handling sheet
metal, Sheet metal has numerous
sharp edges and splinters. Failure
to follow this caution may result in
injury to personnel.
1 .
If removed, install seal (2) to cowl (1)
with 4 screws (3).
TA50400
10-16
