TM 9-2320-289-34
10-6.
WHEEL HOUSE PANEL AND SPLASH GUARD REPLACEMENT.
This task covers:
a. Removal
b. Installation
INITIAL SETUP:
Equipment Condition
Manual References
Hood latch cable and engine oil cooler hoses
l TM 9-2320-289-20
disconnected from wheel house panel (left
side). (See TM 9-2320-289-20)
General Safety Instructions
Battery cables and heater assembly hoses
• Use caution when handling sheet
disconnected from wheel house panel (right
metal.
side). (See TM 9-2320-289-20)
Battery trays and supports removed (right
side). (See TM 9-2320-289-20)
Engine coolant heater removed (if truck
is equipped with winterization kits, left side).
(See TM 9-2320-289-20)
Cab heater removed (if truck is
equipped with winterization kits, right side).
(See TM 9-2320-289-20)
a.
REMOVAL
WARNING
Use caution when handling sheet metal. Sheet metal has numerous sharp
edges and splinters. Failure to follow this caution may result in injury to
personnel.
NOTE
If removing splash guard (2), perform step 2.
1.
If removing left wheel house panel (1), remove service parts identification label and save for
reference.
TA50403
10-21
