TM 9-2320-289-34
10-6.
WHEEL HOUSE PANEL AND SPLASH GUARD REPLACEMENT (Con’t).
4 .
Tighten bolt (6) to 35 Ib.-ft. (47 N.m). Tighten bolts (4, 9, and 10) and screw (7).
5.
Install splash guard (2) to wheel house panel (1) with 7 retainers (3).
FOLLOW-ON TASKS:
l Install cab heater if removed, (See TM 9-2320-289-20)
l Install engine coolant heater if removed, (See TM 9-2320-289-20)
l Install battery trays and supports if removed. (See TM 9-2320-289-20)
• Connect battery cables and heater assembly hoses to wheel house panel if removed. (See
TM 9-2320-289-20)
• Connect hood latch cable and engine cooler hoses to wheel house panel if removed. (See
TM 9-2320-289-20)
TA50405
10-23/(10-24 blank)
