TM 9-2320-289-34
10-6.
WHEEL HOUSE PANEL AND SPLASH GUARD REPLACEMENT (Con’t).
2 .
Remove 7 retainers (3) and remove splash guard (2) from wheel house panel (1).
3.
Remove 7 bolts (9) securing wheel house panel (1) to fender (5) flange. Remove 2 screws (7)
securing wheel house panel to shield (8). Remove 2 bolts (4 and 6) securing wheel house
panel to bulkhead.
4 .
Remove 3 bolts (10) securing wheel house panel (1) to radiator support assembly (11),
5 .
Slide wheel house panel (1) forward to clear lower back side of fenderwell. Remove wheel
house panel from truck.
b.
INSTALLATION
WARNING
Use caution when handling sheet metal. Sheet metal has numerous sharp
edges and splinters. Failure to follow this caution may result in injury to
personnel.
NOTE
If installing splash guard (2), perform step 5.
1 .
Position wheel house panel (1) in truck and loosely install 7 bolts (9) securing wheel house
panel to fender (5) flange. Loosely install shield (8) to wheel house panel with 2 screws (7).
2 .
Loosely install 3 bolts (10) securing wheel house panel (1) to radiator support assembly (11).
3 .
Loosely install 2 bolts (4 and 6) securing wheel house panel (1) to bulkhead.
TA50404
10-22
