WINDSHIELD AND M1009 TOP ASSEMBLY SIDE WINDOW REPLACEMENT
Using fine abrasive cloth, sand bonding surface of support (6). Clean sanded surface with an
alcohol-saturated rag and allow to dry.
Follow directions on manufacturers adhesive to properly prepare support (6) prior to
installation on windshield (3). Install support, to location marked with tape, and press against
glass for 30-60 seconds exerting steady pressure.
After 5 minutes, remove any excess adhesive with an alcohol-saturated rag.
Install inside rearview mirror (7).
Install windshield wiper arms. (See TM 9-2320-289-20)